Search the whole station

软件工程作业代写 Software engineering代写 HW代写

CS 487 Software engineering HW 3

软件工程作业代写 In this exercise we will use different analysis to come up with the reliability and safety requirements. The automatic train allow door to open

Problem 1 Reliability 软件工程作业代写

In this exercise we will use different analysis to come up with the reliability and safety requirements. The automatic train allow door to open for passenger to exit it will open and close automatic safely.

a- (1 pt)

Failure mode effect analysis (FMEA) is conducted as part of the reliability analysis. Severity, probability and detectability are a number from 1-10. Severity is given 10 for the highest severity, high probability of failure occurrence is also given high number and a high detection rank reflects low detection capability of the failure. The risk priority number (RPN) is the product of all three measure. It is important to reduce the RPN especially high RPN by adding mitigations.

ItemFailuremodesCausesEffectsSeverityProbabilityDetectabilityRPNMitigation
          
          
          
          
          
          
          

b-(0.3 pt) 软件工程作业代写

Write the reliability requirement associated with each mitigation and appropriate tests case to verify these requirements (3pts).

c-(0.3 pt)

List application that requires the following attributes and appropriate metric:

High reliability

High reliability on demand

High availability

d (0.9 pt) 软件工程作业代写

Create a preliminary analysis for the automatic door on a locomotive, use the risk matrix provided in the class note (chapter 12)

HazardCauses  Consequence  SeverityProbabilityRisk  Mitigation
       
       
       
       

e-(0.9 pt) Choose one hazard, create a fault tree analysis (FTA) and drill down to a detailed failure causes that contribute to the hazard.

f- 3 Security (1.6 points) 软件工程作业代写

• (0.4 pt) Create a miss use case for a stock market application

• (0.9 pt) Create a design risk assessment for this application, think of all level of security infrastructure, application and operational for the vulnerability, also think about the different types of thread (interception, interruption, modification and fabrication) and fill the table below.

AssetCausal/ VulnerabilityThreatExposure / ConsequenceSecurity measure
     
     
     
     
     
     
     

• (0.3 pt) Come up with the security requirements needed for this application (3 req)

软件工程作业代写
软件工程作业代写

更多代写:Java作业代写  雅思代考  英国毕业论文代寫  留学生毕业essay代写  S留学英文论文代写  微积分网课代修

合作平台:essay代写 论文代写 写手招聘 英国留学生代写

The prev: The next:

Related recommendations

1
您有新消息,点击联系!